Skip to content
Cart, items: 0 Build your head

Help

Care & Maintenance

How to break in your CoolStick pocket and keep it legal all season.

Thank you for purchasing a CoolStick! Every pocket ships pre-formed at the maximum legal depth, so you can catch and throw comfortably right away. As it keeps breaking in, you will need to adjust it to keep it legal. Here’s how.

Hybrid Mesh and Balls Eye pockets

This pocket breaks in very quickly. Over the first six weeks of regular play you will need to adjust it almost daily to keep it legal. After that it holds well; expect to adjust it two or three times during the season.

  1. Find the anchor string at the base of the ball stop and untie it.
  2. Pull the string to make the pocket shallower.
  3. Check the ball in the pocket: it should rest just above the sidewall of the head.
  4. Retie the anchor string.

The 4L pocket

We use leathers because they break in and give you the best feel and accuracy, which is second to none. The pocket is set in our shop to the maximum legal depth, so you will feel the difference right out of the box. As the pre-formed pocket keeps breaking in, you will eventually need to adjust it to keep it legal.

Your CoolStick 4L has a patented pocket locking system that lets you adjust the pocket in about 15 seconds:

  1. Put a finger into one of the two white looped strings attached to the center leathers. The two center leathers have the biggest effect on making the ball legal.
  2. Pull the two white center-leather strings until the leathers move toward the ball stop, moving the ball up in the pocket.
  3. Keep pulling until the ball rests just above the sidewall of the head.
  4. With the ball above the sidewall, turn the head over and pull on the center leathers to close the loop you made by pulling the white strings.
  5. Pull both leathers evenly so they sit roughly parallel. You do not want one leather tighter than the other.
  6. The ball should sit flat, cradled by the outside leathers.
  7. Cinch the two middle leathers at the base of the ball stop to close the loop. Cinching locks the leathers in place.
  8. Adjust the two outside leathers the same way: with the ball in the head, pull them until they lightly hug the ball, then cinch them like the center leathers.

Your CoolStick should now be legal again.

Watch how it’s done

Reset your 4L pocket

Watch on YouTube (opens in a new tab)

Reset your Hybrid Mesh pocket

Watch on YouTube (opens in a new tab)
A restrung CoolStick head with the ball sitting just above the sidewall
The end result: the ball sits just above the sidewall, and your stick is legal again.

Why leathers? We find leathers the best choice for pockets: they are thicker than strings and make a good bumper that keeps the ball centered. They break in beautifully and give the best feel, accuracy and overall performance.

Still not sitting right? Ask Coach Bob or read the FAQs.